Featured Products

Qscan Outdoor 2-D Scanner

Qscan Mini Turnstile and Kiosk Wiegand 12V Imager

Ble1 Bluetooth/Prox Reader

Sproxjx Tri-Technology Reader (barcode / mag / prox)

QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz

Smart Prox J

Proximity reader with optional barcode and magnetic stripe.

Not for new designs. For new designs see the Smart Prox JX

 

 
     
The Smart Prox J is a decoded proximity reader available with proximity only, or a combination of proximity, barcode, and/or magnetic stripe. They can be used anywhere where the reading of either barcodes, magnetic stripes, and proximity cards are required, such as visitor systems, security systems, time & attendance systems, hospitals, and college campuses. These readers are available in a wide array of industry standard interfaces, are programmable, and are available with a variety of options, such as leds, relays, and door sense inputs. The Smart Prox J will read all hi and lo-co magstripes, at any density, most barcode symbologies, and proximity cards by Hid and Pyramid. Proximity formats can also be modified using this reader. For example, 26-bit proximity cards can be read and then reformatted into 34-bit outputs. Perfect for use in Access Control and Time & Attendance applications, and any application where the primary card technology is proximity, but temporary badges are made using barcodes or magstripes. The Smart Prox J is available as a combination reader, with internal proximity reading, as a 1-piece proximity-only reader, or as a 2-piece solution, using an external proximity read head for the proximity reading. This 2-piece solution allows proximity readers with either wiegand or aba output to also use the complete functionality of IBC's "J" series readers, such as computer control, and relay activation.  Any application which currently uses "J" series readers using barcode or magstripe can add proximity support using any model or configuration of the Smart Prox J.

 

Proximity Cards Supported   Farpointe and Hid
Scanning Speed (barcode/mag)   3-30 ips (7-76 cm/sec)
Scan Direction (barcode/mag)   bi-directional
Symbologies (barcode)   Code39, 2/5, I2/5, C128, UPCA, EAN13, Codabar
Resolution (barcode)   7 mil
Read Height (barcode)   0.4"(1cm) standard, 0.465" optional
Tracks (magstripe)   Track2, Tracks 1&2, Tracks 2&3
Good Read Beep   programmable
Slot Width   0.050"(1.2mm). Other widths upon special request
Indicators   2 leds (programmable)
Light Source (barcode)   630nm visible, 940nm infrared
Temperature   -40c to +85c
Dimensions   4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm)
Weight   6 ounces
Material   black polycarbonate (Noryl optional)
Power   5VDC(150ma), 8-15VDC, or 15-30VDC
Standard Wiring   3' (91cm) cable w/flying leads or connectors depending on interface
Relay  

30VDC 500ma Form C
12VDC 700ma direct from POE

Sense Inputs   TTL level (minimal current draw)
Available Interfaces:   RS422
    TCP/IP
    USB
    Wiegand
    ABA (magstripe emulation)
    RS232 wedge
    TTL ascii
    Inverted TTL ascii
    Wand Emulation
    PC Wedge

Programmable
Visible or Infrared Optics
-40c to +85c operation
Networkable
Reads Kronos Cards

5,12, or 24VDC
0.400" or 0.465" read height
Track 2, 1&2, or 2&3
Led's
Internal Relay
Sense Inputs
External keypad support
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Noryl (chemical resistant)

Mounting Kit

     
3rd party software   Highpower Security Products HMS V1.4 (recommended)