Featured Products
Qscan Outdoor 2-D Scanner
Qscan Mini Turnstile and Kiosk Wiegand 12V Imager
Ble1 Bluetooth/Prox Reader
Sproxjx Tri-Technology Reader (barcode / mag / prox)
QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz
Magbar SAStand-Alone combination Barcode and Magnetic Stripe reader for Access Control.
|
||
The Magbar SA is a Stand Alone barcode and magnetic stripe reader for use in Access Control. With 64k of memory and an internal relay, the SA series is a low-cost solution for controlling door access. The reader contains 64K of memory (256K optional), which is enough to store 6000 9-digit employee numbers. The reader can be downloaded with valid employee numbers from a PC, or enrollment of cards can be done directly at the reader. "Schedules" are also supported in the reader, so that access can be limited to specific days and times for each employee. All you need to control a door is to install the Magbar SA with an electric strike or magnetic lock, and you're up and running. For access control which requires monitored access, such as employee ID verification at guard shacks, the SA reader is also available in a portable version with an internal battery. The SA is available with an Rs232 interface, usb, or tcp/ip. Tcp/ip readers can be POE which allows a door strike to be powered directly through the POE interface. |
Magnetic Stripe | Track 2, Tracks 1&2, or Tracks 2&3, lo/hi co | |
Scanning Speed | 3-30 ips (7-76 cm/sec) | |
Scan Direction | bi-directional | |
Symbologies | Code39, 2/5, I2/5, C128, UPCA, EAN13, Codabar | |
Resolution | 7 mil | |
Read Height | 0.4"(1cm) standard, 0.465" optional | |
Good Read Beep | programmable | |
Memory | 64K standard, 256K optional | |
Slot Width | 0.050"(1.2mm). Other widths upon special request | |
Indicators | 2 leds (programmable) | |
Light Source | 630nm visible, 940nm infrared | |
Temperature | -40c to +85c | |
Dimensions | 4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm) | |
Weight | 6 ounces | |
Material | black polycarbonate (Noryl optional) | |
Power | 5VDC(150ma), 8-15VDC, or 15-30VDC | |
Standard Wiring | 3' (91cm) cable w/flying leads or connectors depending on interface | |
Relay | 30VDC 500ma Form C |
|
Display | optional 8-character alpha for time display | |
Battery Time (portable) | Approximate 4 hours with alkaline 9-volt battery | |
POE to strike | 12vdc, max 500ma normally open |
Available Interfaces: | RS232, RS422, TCP/IP, USB | |
RS232, USB (Portable Versions) | ||
Programmable
Visible or Infrared Optics
1 or 2 tracks
-40c to +85c operation
Networkable
Reads Kronos Cards
Available with POE
5,12, or 24VDC
8-char alpha display
256K memory
0.400" or 0.465" read height
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Power over Ethernet
Noryl (chemical resistant)
Portable (9 volt battery)
Mounting Kit
Cable for external 9-volt battery (portable version)
Communications cable (portable version)
AC Adapter (portable version)
IBC software | STA V9.4 | |
3rd party software | Highpower Security Products HMS V1.4 (recommended) |